Sundance SMT398VP - Manual (Page 32)

8. QUALIFICATION REQUIREMENTS
8.1. QUALIFICATION TESTS
8.1.1. Meet Sundance standard specifications
• Meet the Tim standard specifications:
The board has been fitted on all sites of a SMT310Q PCI carrier. It has also been fitted on all
sites of a SMT328 VME carrier.
Various electrical tests were implemented to validate all connections are TIM present.
Board passed the qualification tests.
• Meet the RSL specifications:
Bit Error Rate Test implemented on all links with a reference modules: SMT395, SMT338-VP.
Bit Error Rate Test= Bit Error Count / [Frames Received x Number of Bits Per Frame] <10 ̄ ¹²
Board passed the qualification tests.
• Meet the SLB specifications (LVDS standard).
A SMT391 mezzanine module was fitted and powered through the board. Various functional
tests were implemented to validate all connections and powers between the 2 boards.
Board passed the qualification tests
• Meet the SHB specifications.
Unidirectional, bi-directional, token exchange tests using a 32-bit SDBinterface design,
implemented with other modules (SMT395, SMT365).
Board passed the qualification tests.
• Meet ComPort specifications.
Unidirectional, bi-directional, token exchange tests using Comport designs, implemented with
other modules (SMT395, SMT365).
• Meet FPGA configuration specifications.
All modes of configuration were tested.
Board passed the qualification tests.
Document No.
S M T 3 9 8 V P - D 0 0 0 0 5 8 H - g u i d e . d o c
Revision
2 . 4 . 2
Date
0 8 / 0 2 / 0 7
Page 32 of 34