Q-See QSC26404 - Manual (Page 23)

QSC26404 User’s Manual
23
Currently controlled camera’s name is displayed in the position is selected by the
user.
Select Channel
In PTZ control mode, you can press numeric keys to select channel. For example;
press
【2】key to select the PTZ camera on channel 2.
After you select the PTZ camera, you can use the control keys to control it.
PTZ Control Keys Description
Direction control keys:
【↑】,【↓】,【←】,【→】;
ZOOM control keys:
【ZOOM+】,【ZOOM-】;
FOCUS control keys:
【FOCUS+】,【FOCUS-】;
IRIS control keys:
【IRIS+】,【IRIS-】;
Adjust preset keys:
【REC/SHOT】;
Auto control key:
【PLAY/AUTO】;
Wiper control key:
【WIPER/MENU】;
Light control key:
【LIGHT/F1】;
Auxiliary device control key:
【AUX/F2】
Adjust Preset Description
In PTZ control mode, press
【REC/SHOT】key, and press the preset number (three
numeric keys), DVR will adjust the corresponding preset number. Repeat pressing
【REC/SHOT】key, and press the preset number, DVR will adjust that preset number.
When you exit PTZ control mode, the camera will stay at the current position.
Note: The PTZ preset number is set already. Please refer to PTZ menu for preset setup. Current
firmware can support up to 128 presets.