Q-See QSC26404 - Manual (Page 79)

QSC26404 User’s Manual
79
Fig 7.9 Setup home directory
7. Next time, you do not need to setup again, just double click and open “wftpd32.exe” to
upgrade the DVR/DVS firmware.
7.2 Upgrade Mode
1. Use client software to upgrade the firmware file. You do not need to use ftp server
software. Please refer to the client software user manual for detail information.
2. Use “FTP” function of “Upgrade” sub menu in “Utilities” menu. You need a host PC to
run FTP server software and hold firmware file (digicap), and make sure DVR and PC
are in the same subnet.
3. Use “USB” function of “Upgrade” sub menu in “Utilities” menu. Please make sure the
firmware file (digicap) is placed in the root directory of USB flash drive.