Super Systems e-TRIM - Manual (Page 17)

Super Systems Inc. Page 17 of 27 e-TRIM Operations Manual
Chart Sub Menu
There is a sub-menu available by putting a finger or a stylus anywhere on the chart and holding
it there for a couple of seconds. The sub-menu will have the following options available: Zoom,
Restore, Add Note, Data, and Exit.
The Zoom option will allow the user
to zoom in on a particular part of
the screen. Once this has been
selected, the user can take a stylus
or a finger and create a box around
the desired data. Once the user
releases the stylus or finger, a
zoom is no longer possible, and the
user will need to re-select the
option from the sub-menu to zoom
in again.
The Restore option will back out of any zoom
options that have been performed and display
the chart screen as it initially was.
The Add Note option allows the operator to
enter a note on the chart, similar to writing on
a paper chart. The note shows up when the
chart is printed out using the utility software
included with the SERIES 9130
instrumentation. Pressing the Add Note option
displays a screen where the operator can
enter the operator ID or initials and a note.
The user has the option to enter a note using the operator interface keyboard, where he or she
will be able to type in the note; or the user can use the Signature mode, which will allow them to
write a note using a stylus.
The Data option will show the trend data as a data grid instead of the trend lines on a chart. This
functionality is exactly the same as if the user pressed the Datagrid View button - - from
the chart screen.
Exit will close out the sub-menu without selecting an item.