Teac AI-101DA - Manual (Page 21)

21
Connecting with an already paired Bluetooth device
When the input source of this unit is set to “Bluetooth” and the other Bluetooth device is on,
the Bluetooth function will be active and they will connect automatically .
If they do not connect automatically, however, you can connect them manually as shown in
the following examples with smart phones .
o If a request for a passcode appears on the screen of the Bluetooth device, enter “0000” (four
zeros) .
o When this unit and the other Bluetooth device become connected, the indicator will stop
blinking and stay lit .
o When pairing or connecting with another Bluetooth device, they should be within a few
meters of each other . If they are too far apart, pairing and connection afterwards might
become impossible .
o If the Bluetooth indicator on this unit continues to blink for 10 minutes, it will automatically
enter standby mode . To use this unit, you must turn it on again .
o When Bluetooth input is selected for this unit, the Bluetooth device that was last con-
nected to it will automatically be connected again . If you want to connect with a different
Bluetooth device, conduct pairing with that device .
V NOTE
Regardless of the connection status of this unit and the other Bluetooth device, if the indi-
cator continues blinking for a long time, restart both this unit and the other device and then
reconnect them .
4
Start playback on the other Bluetooth device.
o Confirm that the volume is turned up on the other Bluetooth device . If you do not turn up
the volume on the playback device, no sound might be output from this unit .
o Depending on the connected Bluetooth device, you might not be able to adjust the vol-
ume . For details, refer to the operation manual of that Bluetooth device .
Bluetooth notes
When using this unit with a mobile phone or other Bluetooth devices, they should be no more than
about 10 m (33 ft) apart . Depending on the circumstances of use, however, the effective transmis-
sion distance might be shorter .
Wireless communication with every device that supports Bluetooth wireless technology is not
guaranteed .
To determine the compatibility between this unit and another device that supports Bluetooth wire-
less technology, refer to that device's operation manual or contact the shop where you purchased it .