Teac AG-H600NT - Manual (Page 14)

14
Basic operations
To suspend playback temporarily (pause mode)
During playback, press the play/pause button (G/J). Playback
stops at the current position.
< To resume playback, press the play/pause button (G/J) again.
To skip to the next or a previous track
During playback, press the search buttons (m/,) repeatedly
until the desired track is found.
< When the search button (m) is pressed during playback, the
current track will be played from the beginning. If you want to
play the previous tracks, press the search button (m) twice or
more.
To search for a part of a track
During playback, hold down the search button (m or ,) and
release it when the part you want to listen to is found.
1 Select iPod by pressing the SOURCE button repeatedly.
2 Insert the iPod into the dock.
The iPod automatically turns on and starts playback from the
iPod’s music list.
< When the iPod is inserted while a source other than iPod is
selected, the iPod will turn on and enter the pause mode.
< Make sure to use an appropriate dock adapter (see “Getting
Started” on the owner’s manual of the iPod dock).
< The iPod is recharged when it is plugged into the dock and the
AG-H600 series receiver is on. While the unit is on standby, the
iPod is not recharged because the unit’s power consumption is
minimised to meet the regulation of IEA.
< When headphones are plugged into the iPod, sound comes
from both the speakers of the AG-H600 series receiver and the
headphones.
Listening to iPod