Teac AI-301DA - Manual (Page 19)

19
1
Press the standby/on (¤) button to turn
the unit on.
o You can also use the remote control standby/on
(¤) button.
2
Press the SOURCE button one or more
times to select Bluetooth ( ).
This sets the source to Bluetooth.
o The unit can pair and connect with other
Bluetooth devices and its Bluetooth indicator
blinks.
o The unit retains the same source mode even
when in standby. So, this step can be skipped
if the unit had already been in Bluetooth mode
when it was put into standby.
Bluetooth® (1)
3
Pair or connect with another Bluetooth device.
Pairing with another Bluetooth device
Pairing this unit with another Bluetooth device is necessary the first time you connect with that
Bluetooth device.
To prepare this unit to pair, put it into Bluetooth mode and press the SOURCE button for at
least 3 seconds. When this unit is ready to pair, its indicator flashes rapidly.
After preparing this unit to pair, conduct pairing using the other Bluetooth device.
If pairing has already been completed, follow the instructions in “Connecting with an already
paired Bluetooth device” on page 20.
On the following page, examples of connecting smart phones as one type of Bluetooth device
are given. For details, refer to the operation manual of the Bluetooth device you are using.
Continued on the next page e