Teac A-03 - Manual (Page 9)

ENGLISH
9
PREOUT
R L
1. COMMON
2. HOT (+)
3. COLD (−)
SPEAKER
CLASS 2 WIRING
XLR R RCA
R
BTL
R
XLR L RCA
L
SPEAKER
INPUTS
SIGNAL
IN
GND
CLASS 2 WIRING
INPUT SELECTOR
OUTPUT MODE
BTL
BTL
BTL STEREO
XLR RCA
L
OUTPUT MODE
BTL STEREO
Q
This is an example when using this unit as a monaural power amplifier for the left channel.
CAUTION:
< Switch off the power to all equipment before making connections.
< Read the instructions of each component you intend to use with this unit.
Connect to the right
channel when using this
unit as the right channel
power amplifier.
A loose cable connection may cause the
bare wires or the spade terminal to come
in contact with other metallic parts or the
unit's enclosure. Make sure of a secure
connection.
Sparks may develop, causing failures,
electric shock or burns if the bare wires or
the spade terminal at the end of the
speaker cables come in contact with other
metallic parts or the unit's enclosure.
CAUTION for speaker connections
Preamplifier
RCA audio cable XLR audio cable
Connect one of these
cables.
XLR pin
assignment:
A-03
Left speaker Wall socket
Po
w
er cor
d