Teac PD-501HR - Manual (Page 16)

16
1 4
2 3
1 Set the POWER switch to ON .
2 Hold the edges of the disc with the label
side up and partially insert it into the slot.
3
Continue pushing the disc in until it is
almost completely hidden in the slot. It
will be pulled in the rest of the way
automatically.
If the disc gets caught or is otherwise difficult to push,
do not try to force it into the slot. Press the EJECT (-)
button and remove the disc once and then try to rein-
sert it. (If you try to force the disc, the disc or this unit
could be damaged.)
o When a WAV/DSD disc is loaded and playback
is stopped, press the SELECT button to switch
between disc and folder modes.
Basic operation (1)
Example of display when audio CD loaded
Total number of
tracks on the disc Total playback time
Status indicator
Examples of display when WAV/DSD disc loaded
Disc mode (playback of entire disk)
Status indicator
Total number of tracks on the disc
Folder mode (playback of selected folder)
Total number of tracks in folder
Status indicator
o The indicator in the top left corner shows the
playback status.
8
Stopped
7 Playing back
9 Paused
m Searching backward
, Searching forward