Discs, Discs (1), Audio cds – Teac PD-501HR User Manual
Page 9: Cd-rom/cd-r/cd-rw discs, Dvd-rom/±r/rw discs, Inserting discs, If the disc does not load properly
9
EN
Discs (1)
Audio CDs
CDs that bear the “COMPACT disc DIGITAL
AUDIO” logo (12 cm/4.7")
o
This unit cannot play back 8 cm CDs.
o
Depending on disc quality and recording conditions,
playback of some discs might not be possible.
V
Playback of any other disc type could result
in an unpleasant loud noise, damage to the
speakers as well as potential harm to your hear-
ing. Never play back any other type of disc.
o
The logo should be on the disc label or the CD jacket.
o
Video CDs cannot be played on this unit.
o
Copy-protected discs, dual-layer discs and other discs
that do not conform to the CD standard might not
play correctly in this player. If you use such discs in this
unit, TEAC corporation and its subsidiaries will not be
responsible for any consequences or guarantee the
quality of reproduction. If you experience problems
with such non-standard discs, you should contact their
issuers.
CD-ROM/CD-R/CD-RW discs
This unit can play back CD-ROM/R/RW discs that are in
audio CD or ISO 9660 LEVEL 1/2/JOLIET formats.
o
Discs created by a CD recorder must be finalized with
the CD recorder that was used to create the discs
before being used with this unit.
o
Discs that have not been finalized cannot be played
back. Finalize discs with the device used to record WAV
files on them.
o
If you are uncertain about the handling of a CD-R
or CD-RW disc, please contact the seller of the disc
directly.
DVD-ROM/±R/RW discs
This unit can play back DVD-ROM/±R/RW discs that
contain WAV or DSD files that are in UDF or DVD-ROM-
compatible formats.
o
This unit cannot play back Super Audio CDs.
o
DVD video, DVD audio and related formats cannot be
played back.
Inserting discs
1. Hold the edges of disc with the label side up and insert
it into the slot part way as shown in the illustration.
2. Continue pushing the disc in until it is almost com-
pletely hidden in the slot and it will be pulled in the
rest of the way automatically.
If the disc does not load properly
If the disc gets caught or is otherwise difficult to push, do
not try to force it into the slot. Press the EJECT (-) but-
ton and remove the disc once and then try to reinsert it.
(If you try to force the disc, the disc or this unit could be
damaged.)