Installation, Continued – Desa FPVF33NR User Manual
Page 10
105270-01G
For more information, visit www.desatech.com
For more information, visit www.desatech.com
10
INSTALLATION
Continued
INSTALLATION
Built-In Fireplace Installation
Actual
Framing
Height
32
3
/
8
"
33"
Front Width
34
5
/
16
"
35
1
/
2
"
Depth
16
11
/
16
"
17
3
/
4
"
BUILT-IN FIREPLACE INSTALLATION FOR
MODELS VYGF33PRA & VYGF33NRA
Built-in installation of this fireplace involves installing fireplace
into a framed-in enclosure. This makes the front of fireplace flush
with wall. If installing a mantel above the fireplace, you must follow
the clearances shown in Figure 20,
page 12. Follow the instructions
below to install the fireplace in this manner.
1.
Frame in rough opening. Use dimensions shown in Figure 13
for the rough opening.If installing in a corner, use dimensions
shown in Figure 14 for the rough opening. The height is 33"
which is the same as the wall opening above.
2.
If using blower, install and properly ground GA3555, three-
prong 120 volt electrical outlet, in fireplace. Follow instruc-
tions included in kit (see Accessories, pages 34 and 35).
3.
Install gas piping to fireplace location. This installation includes
an approved flexible gas line (if allowed by local codes) after
the equipment shutoff valve. The flexible gas line must be the
last item installed on the gas piping. See Installing Gas Piping
to Fireplace Location, pages 12 and 13.
4.
Carefully set fireplace in front of rough opening with back of
fireplace inside wall opening.
5.
Plug electrical cord into electrical outlet installed in step 2.
6.
Carefully insert fireplace into rough opening.
7.
Attach flexible gas line to gas supply. See Connecting Fire-
place to Gas Supply, pages 13 and 14.
8.
Attach fireplace to wall studs using nails or wood screws
through holes in nailing flange (see Figure 15).
9.
Check all gas connections for leaks. See Checking Gas Con-
nections, pages 14 and 15.
10. Install brass trim after final finishing and/or painting of wall
(see Figure 7, page 8).
WARNING: A qualified electrician must connect
electrical wiring to duplex outlet for built-in installa-
tion. Follow all local codes.
BUILT-IN FIREPLACE INSTALLATION FOR
MODELS FPVF33PR & FPVF33NR
Built-in installation of this fireplace involves installing fireplace
into a framed-in enclosure. This makes the front of fireplace flush
with wall. If installing a mantel above the fireplace, you must follow
the clearances shown in Figure 20,
page 12. Follow the instructions
below to install the fireplace in this manner.
35
1
/
2
"
17
3
/
4
"
33"
Figure 13 - Rough Opening for Installing in Wall
Actual
Framing
Height
32
3
/
8
"
33"
Front Width
34
5
/
16
"
35
1
/
2
"
Depth
16
11
/
16
"
17
3
/
4
"
39
3
/
8
"
27
7
/
8
"
55
5
/
8
"
35
1
/
2
"
Figure 14 - Rough Opening for Installing in Corner (for Models
VYGF33NRA & VYGF33PRA only)
Figure 15 - Attaching Fireplace to Wall Studs (VYGF33PRA
Shown)
Nailing Flanges
Nails or
Wood
Screws