Teac DV-RA1000HD - Manual (Page 19)

4 − Basic operations
TASCAM DV-RA1000HD
1
LCD screens
The DV-RA1000HD LCD panel enables you to view
the status of the recorder, set the menu parameters,
make the switch settings, and set up the effects.
Home screens
The “home” screens display current information
regarding the mode and status of the recorder. There
are two types of home screens, depending on whether
a CD-R/CD-RW disc or DVD±RW/HD is being used.
These screens are view-only and non-editable. You can
access the screens assigned to the switches by pressing
the function keys. (See “The “home” screen” on page
20.)
Menu screens
The menu screens enable you to set up the system, proj-
ects, discs, copy functions, and other functions. Press
the
MENU key to display the main menu. (See “Menu
operations” on page 21.)
Virtual front panel (VFP)
The virtual front panel allows access to various switch-
es on the screen that are not accessible on the front
panel. Press the
ENTER key from the home screen to
display the virtual front panel. (See “The virtual front
panel (VFP)” on page 23.)
Other screens
The DV-RA1000HD also features special screens for
effects settings, input level settings, and the locate list.
You can recall these screens by pressing dedicated keys.
A typical screen on the DV-RA1000HD
features five switches on the bottom. Press
one of the function keys ( F1 - F5 ) to execute
a function or open a screen assigned to the
corresponding key.
Press the
F1 or F2 key (up/down) to select an
item in the screen.
•
•
Use the JOG/DATA dial to adjust a value or
setting.
Press the
ENTER key to confirm a setting or
selection in the screen.
•
•
Navigating the screens
To adjust the display contrast:
While pressing and holding the DISPLAY key, turn the
JOG/DATA dial to adjust the contrast to suit your light-
ing and viewing angle.
NOTE
You cannot use the JOG/DATA keys on the remote
control unit to adjust the display contrast.
Adjusting the display contrast
Shut down
In order to shut down the DV-RA1000HD safely with a
disc loaded, follow the steps below.
NOTE
During the shut down process, the DV-RA1000HD
writes all the UDFMI data to the DVD±RW disc. (See
“Writing the UDFMI” on page 0.)
1 With a disc loaded, press and hold the OPEN/
CLOSE ( SHUT DOWN ) key for at least a second.
2 A popup menu appears. Press ENTER to do shut-
down, or CANCEL to return (if you pressed the
OPEN/CLOSE key accidentally for a long time, for
example).
3 All front panel controls are disabled. When it has
finished, a popup message appears telling you
that you can turn off the DV-RA1000HD using
the
POWER switch.
NOTE
If you turn off the POWER switch without perform-
ing the shut down operation, the DV-RA1000HD
will automatically perform the shut down process,
then turn itself off. (If you turn off the
POWER switch
during the format or copy operation, the unit will
perform the shut down process after the format or
copy operation is complete.)
If you turn on the
POWER switch before the unit
turns itself off, it will still execute the shut down
process. In this case, turn off the power to the unit
after it completes the shut down operation.