Teac DV-RA1000HD - Manual (Page 31)

5 − CD playback & recording
TASCAM DV-RA1000HD
1
Use the Virtual Front Panel (see “The virtual front
panel (VFP)” on page 23)
RPT switch to change between
single-track and whole disc repeat (and off).
NOTE
The repeat function cannot be used with the single
play function. If either the single play or repeat
function is enabled, it is disabled when the other
function is enabled.
The remote control unit’s REPEAT key also allows these
choices, but the RC-RA1000 also adds an A-B repeat
loop.
A-B repeat Use the A-B key on the remote control
unit to set the A and B points (these must be within the
same track). The first press sets the A point, the next
press sets the B point, and a third press cancels the
loop. Setting a point in another track clears the previous
settings.
Press the STOP key to cancel the A-B repeat function.
Repeat playback DVD HD
Delete the last track in the program list
using the F2 ( DEL ) key.
Confirm the playback order and return to
the previous screen using the ENTER key or
F5 ( HOME ) key (if this screen was entered using
the RC-RA1000, the home screen is shown).
You can also use the remote control unit key
equivalents to perform these operations as
well as the number keys for direct program-
ming.
When programmed playback mode is on,
pressing the PGM switch on the play page of
the virtual front panel or the PGM key on
the remote control unit briefly to turn pro-
grammed playback off. Pressing the PGM
switch or PGM key for at least one second
brings up the program screen.
•
•
•
•
NOTE
If you turn programmed playback on while the
recorder is in playback ready mode or playing, a
track set to “ready” in the program list or a track
that is currently playing will be automatically reg-
istered in the program list.
If you turn programmed playback mode on while
the recorder is stopped, no track will be regis-
tered in the program list.
If you press the
STOP key while programmed
playback mode is on, the first track on the pro-
gram list will enter playback ready mode.
If you press the
ENTER key while the program
screen is displayed and no track has been yet
registered in the program list, programmed play-
back mode will be turned off.
During playback, you cannot delete any tracks in
the program list using the
F2 ( DEL) key.
Pressing the CANCEL key while the program
screen is being displayed will delete the regis-
tered program and programmed playback mode
will be turned off.
•
•
•
•
•
When the SNGL switch is turned on from the vir-
tual front panel, or using the SINGLE key of the
RC-RA1000, the DV-RA1000HD plays to the end of the
current track only, and then stops playback.
NOTE
This function cannot be used together with repeat
playback.
Single track playback DVD HD
When the ASPC switch is turned on from the virtual front
panel, the DV-RA1000HD inserts a gap of two seconds
between tracks when playing back a disc.
This can be useful when recording to an analog tape
deck which can use these silences to detect track divi-
sions.
Auto space playback DVD HD