Teac CD-200 Rev.C - Manual (Page 11)

TASCAM CD-200
11
2 − Names and Functions of Parts
Remote control unit (RC-CD200)
1 Numeric keys
Use these keys to select tracks.
2 DISPLAY
Press this key to show for two seconds the type of
information (playback time or text information) that
currently appears in the main area of the display.
Press this key again while this is being shown to
change the type of information displayed. The type of
information that can be shown depends on the type of
disc loaded and the operation status. (See “Time and
text information display” on page 21.)
3 PLAY MODE/INTRO CHECK
Press briefly to change the playback mode. The three
playback modes are continuous, shuffle and pro-
grammed. (See “Playback modes” on page 18.) Press
and hold this key to use the Intro Check function. (See
“Intro Check” on page 23.)
4 FOLDER ˙ / ¥
Use these keys when a data CD is in the player to
change the playback folder. By selecting “ALL,” every
folder on the disc is made subject to playback. (See
“Folder playback (with data CDs only)” on page 18.)
5
Ô/ Â
Press this key briefly to skip to the previous track.
Hold down this key to search for a part of a track in the
reverse direction.
6
¯/
Press this key briefly to skip to the next track. Hold
down this key to search for a part of a track in the for-
ward direction.
7 OPEN/CLOSE
Use this key to open and close the disc tray.
8 PROGRAM EDIT
Use this to set, confirm and edit programs. (See
“Programmed playback” on page 19.)
9 REPEAT
Press this key to select single repeat or all repeat play-
back. Press this key again to stop repeat playback. (See
“Repeat playback” on page 22.)
0 STOP
Use this key to stop playback.
q PLAY/READY
Use this key to start or pause playback.