Teac CD-200BT - Manual (Page 24)

24
TASCAM CD-200BT
4 – CD playback
Pitch control
Using pitch control playback, CDs can be played back at a
different pitch (sound frequency and playback speed).
Follow the procedures below to use pitch control playback.
1. Press the REPEAT/INTRO CHECK [PITCH] button while
pressing and holding the DISPLAY [SHIFT] button on the
main unit or press the PITCH button on the remote control
to turn pitch control ON. The current pitch control value is
shown at this time.
2. Use the FOLDER g/t [PITCH −/+] buttons while pressing
and holding the DISPLAY [SHIFT] button on the main unit
or use the PITCH –/+ button on the remote control to set the
pitch in 0.5% units in a range of ±14.0%.
8 To turn pitch control playback OFF:
Press the REPEAT/INTRO CHECK [PITCH] button while
pressing and holding the DISPLAY [SHIFT] button on the
main unit or press the PITCH button on the remote control.
NOTE
• During playback, turning pitch control playback ON or OFF
might cause the playback sound to skip momentarily.
• Using pitch control playback with a data CD (MP3, MP2,
WAV) sometimes causes the playback sound to skip.
• When the pitch control function is on, digital output is
possible, but the sampling frequency will be changed by
an amount equivalent to the pitch control value. When the
pitch control function is on, some devices might not be able
to receive this unit’s digital output.
• The pitch control function cannot be used with Bluetooth.
Intro Check function
When stopped or during playback press and hold the main unit
REPEAT/INTRO CHECK [PITCH] button or press the remote
INTRO CHECK button to play the first 10 seconds of each track
one after another. The
INTRO
indicator appears when this
function is active.
During intro check playback, press and hold the REPEAT/INTRO
CHECK [PITCH] button on the main unit or the INTRO CHECK
button on the remote to return to ordinary playback mode
(
INTRO
disappears from the display).
o When using Intro Check, briefly press the main unit SEARCH
m /, [.//] buttons or the remote search
(m/. and //,) buttons to skip to the preceding
or next track.
o Press the STOP button to stop Intro Check.
o The intro check function can be used during program and
folder playback modes.
CAUTION
The intro check function cannot be used with Bluetooth.