Teac CD-200BT - Manual (Page 27)

TASCAM CD-200BT
27
6 – Message Lists
Operation messages
Depending on the operation of the unit, the following messages will appear in the main display area.
Message Meaning Response
-AUX- AUX IN is selected as the current source.
CANCELED An operation has been canceled.
-CLEAR-
All programs have been cleared.
CLOSE The disc tray is closing.
CONNECT The unit is connected with a Bluetooth device.
ERASING All pairing data is being erased.
NO DISC There is no disc or the disc cannot be verified.
NO FILES The data CD has no files that can be played back. Load a disc that contains playable files.
NO NAME There is no artist data or no file data that can be displayed.
NO PAIR The unit is not paired with any Bluetooth device.
NO TITLE There is no title data that can be displayed.
OPEN The disc tray is open.
PAIRED Pairing has succeeded.
PAIRING
(Blinking)
Pairing is being conducted.
TOC READ A file is being processed. Do not remove the media.
Warning messages
If an operation cannot be completed, one of the following messages will appear for about two seconds and then disappear.
Message Meaning Response
NO PGM No program has been created. Add tracks to the program.
PGM FULL No more tracks can be added to the program.
A program can contain a maximum of 99 tracks. Clear
tracks from the program and try again.
Error messages
If one of the following error messages is shown, please refer to the Response column and try to resolve it. If you are still unable to correct
the problem, please contact the nearest retailer or TASCAM representative.
Message Meaning Response
BT ERR
(Blinking)
Communication with the Bluetooth receiver is not possible. Contact the nearest retailer or TASCAM representative.
COMM ERR
(Blinking)
Cannot communicate with the CD drive. Contact the nearest retailer or TASCAM representative.
COMM ERR An error occurred during communication with the CD drive. Contact the nearest retailer or TASCAM representative.
DEC ERR The file type is not supported or otherwise could not be played. Change the data CD.
DISC ERR
The TOC or file system could not be read, or focus adjustment
was not possible.
Clean or change the disc.
DRV ERR The CD drive hardware is broken. Contact the nearest retailer or TASCAM representative.
READ ERR The track cannot be accessed. Clean or change the disc.