Using built-in effects, Using.built-in.effects, Important safety instructions – Teac CD-VT2 User Manual
Page 31: Using mics with the trainer
IMPORTANT SAFETY INSTRUCTIONS
1
TASCAM CD-VT2
Using mics with the trainer
3 Use the
VALUE
(+, –)
keys to adjust the level. The level
knob icon rotates as you change the value.
NOTE
The input meter at the bottom of this screen shows the
total level of the signal input at the
MIC IN
jacks.
Using built-in effects
This device has a built-in mic effects processor. Press the
EFFECT
key to open the
EFFECTOR
screen.
As shown in the figure above, in addition to
BANK
and
PRESET
, the
EFFECTOR
screen also shows the
LVL
(level)
knob, an icon for the selected mic effect and the
VCH
(voice
change) icon. These all have adjustable settings.
Use the
CURSOR
(
˙
,
¥
) keys to move between the
LVL
knob,
effect parameter knob and voice change icon. When you select
the
LVL
knob or other parameter, a pop-up appears for the
setting items. Use the
CURSOR
(
§
,
¶
) keys to select settings
in the pop-up, and use the
VALUE
(+, –)
keys to adjust these
settings.
BANK
Select bank
01
–
05
or
BYPASS
.
Using the
PRESET
item explained below, you can set a
preset effect for each bank. By making presets of settings that
you use frequently in each bank, you can quickly recall the
settings you desire just by switching through the banks.
Select
BYPASS
if you do not want to use effects.