Teac CD-VT2 - Manual (Page 34)

 TASCAM CD-VT2
IMPORTANT SAFETY PRECAUTIONS Other functions
Stopping the metronome
Do one of the following:
Press the
STOP
key.
Turn the
METRONOME
item OFF on the
SETUP &
MISC.
screen.
NOTE
Pressing any of the CD player operation keys will also
turn the metronome OFF.
•
•
Using the tuner
By using a mic to input the sound of an instrument, you can
use the built-in tuner to check its pitch. You can also use
the tuner to specify a tuning pitch and output it through an
attached speaker, allowing you to tune multiple instruments at
the same time.
First, select the tuner mode.
1
Press the TUNER key to open the
TUNER
screen.
2 With the
MODE
value selected, use the VALUE (+, –)
keys to select one of the following tuner modes.
AUTO
chromatic tuner
OSC.
oscillator mode
These modes are explained separately in the following
sections.