Teac FW-1082 Setup Guide - Manual (Page 7)

1 – Introduction
TASCAM FW-1082 Setup Guide
7
Before installing the software
The normal precautions apply when setting up the
FW-1082:
• Make all (computer, audio and MIDI) connections
to the FW-1082 with the power turned off. See
“Connections” on page 12 for details of how to
make connections.
• Do not connect the FW-1082 to the computer until
you have installed the software.
• Handle the enclosed CD-ROM with care. If it
becomes dirty or scratched, it will be impossible
for a computer to read it, and the software cannot
be installed. If the disc becomes unreadable, a
charge will be made for its replacement, but soft-
ware and documentation can be downloaded from
the TASCAM Web site.
• Do not attempt to play the enclosed CD-ROM
using an audio CD player, as this may cause dam-
age to hearing, as well as to speakers, etc.