Teac LA-40MKIII - Manual (Page 10)

10
TASCAM LA-40MKIII
3–ADA Functions
By using the LA-40 MK III INPUT LINK switches io,
the signals input from single connectors can be routed
to other channels and output as desired.
In this example, the signal input through channel 5 is
routed to channels 5–8.
1 Input a signal through the (unbalanced) INPUT 5 6.
2 Turn INPUT LINK switches 6–8 o ON.
3 The signal input through channel 5 is output through
(balanced) OUTPUTS 5–8 7.
In this example, a stereo pair of signals input through
channels 5 and 7 are output in parallel to 2 channels
each.
1 Connect the left stereo signal to the (unbalanced) INPUT 5
6 and the right stereo signal to the (unbalanced) INPUT 7
connector 6.
2 Turn INPUT LINK switches 6 and 8 o ON.
3 The left stereo signal input to channel 5 is output through
(balanced) OUTPUTS 5–6 7, and the right stereo signal
input to channel 7 is output through (balanced) OUTPUTS
7–8 7.
Example 1
Example 2
E_LA-40mkIII-OM_RevC.indd 10 08.12.19 1:03:24 PM