Teac US-1641 - Manual (Page 25)

IMPORTANT SAFETY INSTRUCTIONS
TASCAM US-1641

8 – Specifications
TASCAM US-1641

DIGITAL OUT jack (digital)
Connector RCA pin jack
Signal format Selectable in the Control Panel between IEC958 Consumer
(S/PDIF) and IEC958 Professional (AES/EBU)
Level 0.5Vpp/75 Ω
LINE OUT [1-4] jacks (analog)
Connector 1/4” phone jack
Type and wiring Balanced (Tip: hot, Ring: cold, Sleeve: ground)
Output impedance 100 Ω
Nominal output level +4dBu
Maximum output level +20dBu
MONITOR OUTPUTS [L/R] jacks (analog)
Connector 1/4” phone jack
Type and wiring Balanced (Tip: hot, Ring: cold, Sleeve: ground)
Output impedance 100 Ω
Nominal output level +4dBu
Maximum output level +24dBu
PHONES jack (analog)
Connector 1/4” stereo phone jack (Tip: L, Ring: R, Sleeve: ground)
Maximum output level 50mW + 50mW (32 Ω /1% distortion)
MIDI IN connector
Connector 5-pin Din [Standard MIDI format]
MIDI OUT connector
Connector 5-pin Din [Standard MIDI format]
USB connector
Connector USB Series B connector
Format USB 2.0
General specifications
Sampling rate (internal clock) 44.1kHz, 48kHz, 88.2kHz, 96kHz
Sample width 24-bit
External dimensions (W x D x H) 482.6 x 280 x 44 (mm) / 19 x 11.1 x 1.74 (in)
Weight 3.2kg / 7.1lb
Power U.S.A./Canada 120V AC, 60Hz
U.K./Europe 230V AC, 50Hz
Australia 240V AC, 50Hz
Power consumption 10W