Teac US-2000 - Manual (Page 10)

10
TASCAM US-2000
5 Click the “Install the Driver” button when the screen
below appears.
6 Read the contents of the License Agreement, and
select “I accept the agreement” if you agree to the
terms. Next, click the “Install” button to start instal-
lation.
7 When the screen below appears, use the supplied
USB cable to connect the unit to the PC.
8 When the screen below appears, unplug the connect-
ing USB cable from the unit or the PC.
9 When the screen below appears once more, recon-
nect the unit and the PC with the USB cable.
10 When the screen below appears, the installation is
complete. Click the “Reboot now” button to restart
the PC to use the driver.
11 After the PC has restarted, open the “TASCAM
US-2000” (“Start > Control Panel”) or “US-2000
Control Panel” (“Start > All Programs >
TASCAM”). If the Driver Version, Device and other
data appear correctly, the installation has succeeded.
3 − Installation