Teac DR-70D Reference Manual - Manual (Page 33)

TASCAM DR-70D
33
8 – Settings and Information
Viewing information
Use the
INFORMATION
screen to view various types of infor-
mation about the unit.
Follow the procedures below to open the
INFORMATION
screen.
1. Press the MENU button to open the
MENU
screen.
2. Turn the DATA dial to select OTHERS , and press the DATA
dial to open the OTHERS screen.
3. Turn the DATA dial to select INFORMATION , and press
the DATA dial.
The PROJECT page (1/3) of the INFORMATION screen is
shown.
The
INFORMATION
screen contains the following pages.
4. Turn the DATA dial to change the page.
The pages show the following information.
PROJECT (1/3) page:
Shows information about the currently loaded file.
CARD (2/3) page:
Shows the use status of the currently inserted SD card.
SYSTEM (3/3) page:
Shows the unit’s system setting information and firmware
version.
File information page (PROJECT)
The PROJECT (1/3) page shows information about the currently
loaded audio file.
8
WAV/BWF
Shows the audio file type.
For WAV/BWF files, bit depth, stereo/mono and sampling
frequency (Hz) are shown.
8 TITLE
Shows the project name.
8 DATE
Shows the date of file creation.
8
SIZE
Shows the file size.
Card information page (CARD)
The CARD (2/3) page shows the status of the currently inserted
SD card.
8 TOTAL MUSIC
Shows the number of playable files in the Music Folder.
8 TOTAL FOLDER
Shows the total number of folders in the Music Folder.
8 TOTAL SIZE
Shows the total SD card capacity.
8 REMAIN SIZE/USED SIZE
Shows the amount of unused/used capacity on the SD card.
Press the 4/. or 3// button to switch between REMAIN
SIZE and USED SIZE.
System information page
The SYSTEM (3/3) page shows information about the unit’s
system settings and firmware version.
8 AUTO PWR SAVE
Shows the automatic power saving time setting.
8 BACKLIGHT
Shows the automatic backlight OFF setting.
8 BATTERY
Shows the battery type setting.
8
System Ver.
Shows the system firmware version.