Tendzone TYCHO T 1212/CA - Manual (Page 48)

Figure 45
The interface can display 8 channels at most, which can be switched by pressing key; click the channel to switch
the above functional module display box. See 2.1.2.3 for the channel information.
The input channel supports grouping function, and multiple channels can set to a group. When the gain of the group is
adjusted, the gain of the subordinate channel is also changed. The grouping identification will be on the gain fader after
grouping. The system provides two groups: one is GROUP group, to directly adjust the gain value; the other is DCA group,
to adjust the gain percentage.
- The above edit box displays the channel name, which can be modified.
- PRE/POST: the electrical level displayed is before or after fader.
- Level display and output gain adjustment fader.
- Output gain
2.12.1From
Figure 46
Select the input signal from which the output channel signal are taken. If more than one signals are selected, then the
signal are superimposed for output.