Teo 8610 ISDN Phone Installation - Manual (Page 18)

Tone Commander 8610/8620 Installation Instructions
Page 18 13-280116 Rev. C
Firmware Updates
Call Tone Commander technical support at (800) 524-0024 to get information on firmware updates.
Using Local Inspect to Verify Keys
Local Inspect allows you to identify the call appearance or feature assignment of each configured key,
directory number bearer capabilities, and the feature indicator assignment for the Message Waiting
Indicator. Please refer to page 31.
Label the Set ________________________________________________
Label the multifunction keys with the telephone number, feature name, speed dial party name, or other
appropriate designation. A perforated label sheet is provided with the telephone.
The 8610/8620/8810 User Setup Program allows you to set up key labels, Speed Dial keys, Voice Mail
Menu keys, and the Call Directory using a Windows PC interface. The phone setup information can be read
from the phone, saved to disk, and loaded into an 8610, 8620, or 8810 telephone that is equipped with an
8001TA or 8003TA Terminal Adapter. The program will also print key labels for the 8030X Button
Expansion Module and 8610/8620 telephones. You can download this program from
www.tonecommander.com; please refer to Appendix A on page 41.
Install the key label overlays by inserting the tabs into the openings on the phone.
A space is provided beneath the handset for a directory number label. Use ½” x 1¾” adhesive labels
(Avery 8167 / 5267 or equivalent).