Thinklogical Direct Fiber Input Card for Christie Entero Video Wall - Manual (Page 5)

C h r i s t i e D i r e c t F i b e r I n p u t C a r d M a n u a l , J a n u a r y , 2 0 1 4 Page 4
1.2. The Christie Digital Entero HB Video Wall Display
The Christie Digital Entero HB Video Wall Display system includes a VelocityDVI 3 Transmitter (or any
Single-Link Velocity DVI or KVM Transmitter) which connects to the source. The Transmitter converts the
DVI signal from the source into optical data for fiber optic transmission. Depending on the application, the
Transmitter connects to the Thinklogical Direct Input Card over multi-mode or single mode fiber optic
cable. The Input Card, or receiver, is installed directly into a Christie Entero HB Video Wall Cube. The
Input Card receives the signal from the transmitter, delivering content to the cube. The system requires
only a single fiber connection for video transmission, with an optional second return fiber connection for
EDID table support. Single fiber applications require that the Christie EDID table be manually loaded into
Thinklogical’s Transmitter for support of Christie resolutions. For routing applications, the direct input card
is compatible with all Thinklogical MX and VX Routers.
For simple plug-and-play, the system requires two fibers; one for video transmission (L1) and one
for EDID table support (L2). Single fiber applications (fiber L1, TX to RX only) require that the
Christie EDID table be manually loaded into Thinklogical’s transmitter for support of the Christie
resolutions.
1.2.1. Loading the EDID Table
To load the EDID Table from a Christie Digital unit to a Thinklogical AIM-FIB01 module:
• Connect the network to the ETH2/USB2 port and turn the unit on.
• When the unit goes to standby, the IP address will be displayed. Put this in a browser and log
into the Entero HB or equivilent. User Name/Pass Word is service/service.
• Go to ‘Display Configuration/EDID’.
• Click the ‘select all’ option.
• In the EDID box select ‘Reset to EDID Defaults’
• Select ‘Submit’
NOTE: The Thinklogical Direct Input Card Module is shipped with the default Christie
EDID Table already loaded.