3 product features – Thinklogical Direct Fiber Input Card for Christie Entero Video Wall User Manual
Page 6
C h r i s t i e D i r e c t F i b e r I n p u t C a r d M a n u a l , J a n u a r y ,
2 0 1 4
Page 5
1.3 Product Features
•
Supports One Single-Link DVI signal (All single-link DVI signals)
•
6.25Gbps allows for full frame rate transmission of uncompressed DVI
•
Patented MRTS Technology provides flawless image quality with no frame dropping
•
HDCP Compliant (with HDCP Compliant Transmitter)
•
DDC/EDID Compliant
•
Mini-USB port for software program updates
•
LC fiber connectors
•
Hot-swappable optical module (SFP+)
•
Simple plug and play design
•
MX and VX Router Compatibility, Scalable from 5 to 640 ports
•
Multi-Mode or Single Mode Compatibility
•
Multi-Mode Extension up to 1000 meters
•
Single-Mode Extension up to 80 kilometers
•
L1 LED Status Indicator:
•
Software Revision: At power-up, L1 blinks once for each software revision
(1 blink = rev. 1, 2 blinks = rev. 2, etc.)
•
Fiber Input Link: L1 is ON when a fiber is detected and a valid signal is received
•
VID LED Status Indicator:
•
Hardware Code Revision: At power-up, VID blinks once for each hardware code revision
(1 blink = rev. 1, 2 blinks = rev. 2, etc.)
•
Video Receiving: VID is ON when a valid video signal is received
•
STATUS LED Indicator:
•
Temperature: STATUS blinks for over-temperature conditions
•
Active Back Channel Output: STATUS is ON when transmitting 2G back channel
•
SFP Status: STATUS is ON when there is no SFP transmit fault
•
Valid EDID Table: STATUS is ON when a valid EDID table has been received
For use with Christie Entero HB Video Wall Cube models:
•
50”, 67”, 70” and 80” High
Brightness SXGA+
•
70” High Brightness HD
•
72” High Brightness WUXGA
Provides easy integration with fewer points of failure, requiring just a single strand of fiber.
•
No external receiver
•
No additional external power supply
•
No DVI cabling from receiver to cube