Thinklogical Q-4300 Video Modules Manual - Manual (Page 36)

®
Q - S e r i e s V i d e o M o d u l e s P r o d u c t M a n u a l , R e v . I Page 36
Appendix C:
Thinklogical VQM-10 AV+ LCD Menu Options (Q-2300 & Q-4300 Chassis) *
*Q-Series LCD menus operate the same as on VelocityRGB-10AV+ Stand-Alone units.
Transmitter LCD Menus:
Thinklogical
Velocity TX10 V22.04
*System
LS Connected
Yes/No. =
No
Load Defaults
Yes/No. =
No
Store Values
Yes/No. =
No
NO Low Speed Data Channel Connection
YES
Modifiable Description VQM-10AV+ TX Front Panel LCD Display
Scroll Right or Left within the *System menu
Displays current revision. (Scroll Up or Down to
access top level *Menus.)
NO
NO
YES
NO
TX Cntrl. Version
Rev.= 22.04
RX Ctrl. Version
Name =
Unknown
Serial Number
S/N. = _ _ _ _ _ _ _ _ _ _ _ _ _
Debug Values
Yes/No. =
No
Customer can choose to load video parameters from factory
default settings
Will save current edited video parameters
Current control code revision
Connected receiver’s control code revision
Reserved for manufacturing test use
NO This unit’s serial number
Video FPGA Device ID
0x4100
Video FPGA Version
0x4.1.02
Main FPGA Device ID
0x2400
Main FPGA Version
x0.0.05
LS Des OK Signal
1
LS LOSS of Signal
1=0 2=0
Temp in Celsius
Tb= 32C Tf=37C
ALARMS TEMP
0
NO Temperature of PC Board (Tb) and FPGA (Tf)
NO Low Speed Deserializer Signal: 1=OK, 0=NO
NO Loss Of Low Speed Signal: 0=OK, 1=NO
NO 0=No Temperature Alarm, 1=Temperature Alarm
NO Identifies the installed Video FPGA device
NO Main FPGA Device’s currently installed revision
NO Identifies the currently installed Main FPGA version
NO Identifies the installed Main FPGA Device
Page 1 of 8, Appendix C