Thinklogical Velocityrgb System-9, 10 and 12 Manual - Manual (Page 20)

Revision D 15 December 2012
4.2.2 Saving Changes
Save video configurations so that after powering up, the device can recall customer video
settings.
Using the down arrow, scroll down to *System as shown below.
Using the right arrow, scroll right until Store Values is displayed as shown below then press enter.
Using the up arrow or down arrow scroll until Yes appears as shown below. Then press enter.
*System
Store Values
Yes/No=
NO
Thinklogical
VelocityTX9
vxx.xx