Error and status codes – Thinklogical Router - ASCII-API User Manual
Page 27
Error and Status Codes
1.1
0001 – Syntax error.
1.2
0002 – The command is missing an input port field.
1.3
0003 – The command is missing an output port field.
1.4
0004 – The command has multiple input fields, but only 1 is allowed.
1.5
0005 – The command has multiple output fields, but only 1 is allowed.
1.6
0006 – The input port value is out of range.
1.7
0007 – The output port value is out of range.
1.8
0008 – The command contains an invalid character.
1.9
0009 – A port value of 9999 is not allowed in this command.
1.10
0010 – A SNMP error occurred (only a DCS switch will generate this error).
1.11
0011 – An error occurred while attempting an internal fork command.
1.12
0012 – API received a command that is not allowed.
1.13
0013 – Not enough memory to process the command
1.14
0014 – File I/O error; an error occurred while reading or writing a file.
1.15
0015 – The VxRouter control process is not responding.
1.16
0016 – The command references multiple chassis, but the router only has one.
1.17
0017 – A macro was sent with a semi-colon ';', but the router is uni-directional. Uni-directional routers
do not allow port numbers after a semi-colon.
1.18
0018 – Partition or Restrictive port failure.
1.19
0019 – The connection can not be made because of a blocking condition in the internal switch matrix.
Error 10:
This is only generated by a DCS switch.
Error 11, 13, 14, 15:
An internal program error: Contact Thinklogical if you get this message.
Error 12:
API V4 does not use this error code.
Jun 12, 2014
Router ASCII API: V4.5-1
26/33