Thinklogical AlterImageRGB to DVI Converter Manual - Manual (Page 12)

MAN-000019 10 REVISION A
1. Plug the supplied HD15 cable (CBL000002-002MR) from the RGB CPU to the VGA IN (HD15)
connector. Plug keyboard and mouse cables into the CPU at this time. Turn ON the CPU.
NOTE: Do not hot plug the keyboard and mouse PS2 cables.
2. Plug the RGB Monitor into the VGA OUT (HD15) connector. Turn ON the monitor.
3. Plug the supplied DVI-D cable (CBL000009-002MR) from the DVI display to the DVI OUT 1
(DVI) connector. Turn ON the monitor.
4. Plug the supplied DVI-D cable (CBL000009-002MR) from the DVI display to the DVI OUT 2
(DVI) connector. Turn ON the device.
5. Connect the power supply (PWR-000022-R) to the Converter and connect the power plug into
a suitable power source.
Your AlterImage Converter is now properly connected.