Thinklogical AlterImageRGB to DVI Converter Manual - Manual (Page 6)

MAN-000019 4 REVISION A
2. System Features
2.1. General System Features
Each system consists of a single unit capable of converting VGA (analog video signals) into compatible
DVI (digital video signals). Each unit has the ability to drive two independent DVI outputs. The unit has
a VGA loop-thru to connect a VGA monitor. The unit also can be ordered with a fiber output option to
transport the converted signals up to 1000 meters (3280 feet).
The AIC-1 (AlterImage Converter) converts an RGB source into two DVI-D signals.
Each AlterImage includes the following features:
Converts VGA to DVI
Built in 2 port DVI Video Distribution Amplifier (DVI Splitter)
Loop through VGA port
DDC EEPROM with VESA standard formats
Front panel video timing and phase adjustment capability
Fully compatible with all Thinklogical™ DCS Matrix Switches and VIS or EVS Series Fiber Optic
Receivers
2.2. Technical Specifications
Video Resolution RGB 1280 x 1024 @ 60Hz
Supply Voltage +5.0 V DC
DC Adapter AC/DC adapter universal input 90-264 VAC (supplied)
Power Consumption 8 Watts
Operating Temperature and
Humidity 0 to 50 °C (32 to 122 °F); 5 to 95% RH, non-condensing
Storage Temperature -20 to 70°C (-4 to 158°F), 10 to 90% RH, non-condensing
Front Panel Display 2 x 24 Liquid Crystal Display
Panel Connectors AlterImage Converter Version
Video
– RGB HD15 (2)
Video – DVI DVI-D (2)
Software Updates USB B (1)
Power 2.5mm threaded connector