Asynchronous word length, Signalling rate range, Not used – Verilink DDS Lite (34-00295.C) Product Manual User Manual
Page 16
Advertising
10
C
HAPTER
2: I
NSTALLATION
AND
C
ONFIGURATION
Asynchronous
Word Length
Switches SW2 - 2 and SW2 -3 are set to match the number of bits
that make in each word of the asynchronous data. Refer to the
table shown in the upper right of Figure 2-1.
Signalling
Rate Range
Switch SW2-4 is set to match the ranges provided by the service
provider.
A - Basic (
−
2.5 to 1.0%)
B - Basic (
−
2.5 to 2.3%)
Not Used
Switches S2-5, S2- 6, S2-7, and S2 - 8 are not used.
Advertising