Verilink NetPath 2000 Product Manual - Manual (Page 26)

3-8 N e t P a t h 2 0 0 0
New Shared Secret
(PSK)
Sets the shared secret password for authentication. This password is case
sensitive.
Confirm Confirms the previously set shared-secret password. This character string is
case sensitive and must match the previously set shared secret.
System
The system-level configuration lets you modify the system-level networking
capabilities, including remote management via SNMP and NAT between the
Ethernet and wireless ports.
SNMP Management Enables SNMP.
Values: OFF, ON
Name Sets SNMP name.
Location Sets SNMP location.
Contact Sets SNMP contact name.
Community Sets SNMP community delimiter.
NAT Enables NAT between the wireless network interface and the branch router
and local management interfaces.
Values: OFF, ON
Applying Configuration Changes
The following buttons appear at the bottom of the Configuration screen.
Apply This button applies the configuration changes. You must apply the changes
before they will take effect. After selecting “Apply,” the changes are made
and the browser will revert to the Status Display screen.
Cancel This button cancels any configuration changes. After selecting “Cancel,” all
changes are canceled and the browser will show the Status Display screen.
Restore Defaults This button will restore all configurable entries to the factory default settings.
Select “Apply” to complete this action.
Code Update
To update the NetPath 2000’s operating software, select the “Code Update
button. The NetPath 2000 will display the screen shown in Figure 3.5.