Verilink SNMP Management (No Part Number) Product Manual - Manual (Page 4)

SNMP Management
SNMP-4
Verilink SNMP
In Table 3 below, column 1 specifies the modules controlled and
column 2 specifies the associated MIB tables that contain the
objects that can be used to control the module. For example,
objects controlling the ISDN-specific characteristics of the DPRI
may be found in table [ncm-isdn].
Table 3 Modules Supported by MIBs
MIB Tables This section lists MIB tables for the following:
• MIB-II Interface
• DS1 MIB Interface
• Verilink Enterprise MIB
Module Type Object-Type
NCM Node
NCM 2000 [system]; [ncmAlarm]; [ncm-generic]
DIDCSU 2912 [ncm-generic]
Dual CSU 2911 [ncm-generic]
DPRI 2922 [ncm-isdn]; [ncm-generic]; [ncm-japi] (Japan); [ncm-
npri] (North America)
QPRI [ncm-isdn]; [ncm-generic]; [ncm-japi] (Japanese);
[ncm-npri] (North American)
QUAD 2164 [ncm-quad]; [ncm-generic]
HDM 2180 [ncm-ds3]
HDM 2182 [ncm-ds3]
TAC 2010 [ncm-csu]; [ncm-generic]
TAC 2130-S
/TAC2131-T
[ncm-idcsu]; [ncm-csu]; [ncm-generic]
DIU 2130 [ncm-dsu]; [ncm-generic]
DIU 2140 not supported yet
DIU/DDS [ncm-dds]; [ncm-dsu]; [ncm-generic]
DIU/DBU [ncm-dbu]; [ncm-dsu]; [ncm-generic]
IMUX [ncm-imux]; [ncm-generic]
SCM Node
SCM [system]; [ncmAlarm]; [ncm-generic]
QUAD T1 [ncm-quad]; [ncm-generic]
M1-3 [ncm-m13]; [ncm-generic]
IMUX [ncm-imux]; [ncm-generic]
QUAD DATA [ncm-generic]