Verilink WANsuite 5650 (34-00314.E) Product Manual - Manual (Page 50)

3-28 W A N s u i t e 5 6 5 0
Service Table Screen
Selecting the “Services” option from the Main screen will display the Service
Table screen shown below (Figure 3.22). The Service Table screen provides a
view of the unit’s defined services and displays the Interface, Type, and Pair
parameters for each service.
Figure 3.22 Service Table Screen
The Service Table screen displays the available services listed by Index
number. From the Service Table screen, you can navigate:
• to a Service Details screen (Figure 3.23) from the <Index> column;
• to an Interface Details screen (Figure 3.24) from the <Interface> column
(when applicable);
• or to a Type Details screen from the <Type> column (when applicable).
The prompts displayed on this screen are described in the following table:
Prompt Function
Index Opens the Service Details screen (Figure 3.23 on page 3-29).
Interface Opens the Details screen for the Interface of the currently selected
service.
Type Opens the Details screen for the Type of the currently selected service.