Vinpower Digital HDDShark - Manual (Page 11)

8
Turn on HDD Bay
Press ENT to Cont.
Step 5.
Power on the system by
pressing the Power button
Step 6.
After it has booted up, the
screen on the left should
appear signifying the system
is ready.
Press the “F1 Smart Copy”
button to initiate the copying
process.
Step 7.
When prompted, power on all
hard drive included Bays by
pressing the corresponding
activity LED. Those activity
LEDs shall then turn to
green.
Then press ENT button once
to proceed.
DUPLICATOR H.01
1.Copy (Smart)