Vinpower Digital HDDShark - Manual (Page 16)

13
4.
Copy Mode
This setting will allow for the selection of a Copy Mode. There are 3 options:
 Smart: This mode is the recommended and fastest approach to making copies
since it will analyze the source hard drive on supported file systems (FAT16/32,
NTFS, exFAT, ext2/3/4) and copy only the area that contains data. If the file
system on the source hard drive is NOT being supported, the system will
automatically shifts to RAW mode.
 RAW: This mode is the safest and slowest approach to making copies since it will
copy the entire source hard drive bit by bit.
 Partition: This mode is like RAW mode, but it will copy only the valid partitions of
the source hard drive (along with MBR/GPT table) bit by bit instead.
5. Setup
1) Language
This setting will allow you to choose the display language of the system.
2)
Buzzer
This setting will allow the choice to hear a beep sound when a button is pressed
or when a task has been completed.
3)
Screen Saver
This setting will allow the choice to enable the Screen Saver feature or not. By
enabling this feature, a screen saver will be displayed when the system has been
idle for an extended period.
Copy Mode
SMART
Copy Mode
RAW
Copy Mode
Partition