Vinpower Digital HDDShark - Manual (Page 13)

10
Step 10.
Upon complete, the system
will show the job report.
Below explains the various items in the job report:
 [OK:01] – indicates the number of copies passed in this process.
(1 in this example)
 [NG:00] – indicates the number of copies failed in this process.
(0 in this example)
 [12m20s] – indicates amount of time took for this process.
(12 minute and 20 seconds in this example)
 [S 1 2 3 … E] – indicates the port number.
“S”: Source Port; “1 ~ 9”: Port 1 ~ 9; “A ~ E”: Port 10 ~ 14;
(Source Port and Port 1, 2 are shown in this example)
 [o, x, -] – indicates the result for every individual port above.
“o” indicates OK; “x” indicates NG; “-” indicates port empty
(Port 1 is passed, and Port 2 are not used in this example)
OK:1 NG:0 [12m20s]
Press ENT to Cont,
S 1 2
o o -