Product identification, Optional product features, Installation – Desa VTD-24N-JHB User Manual

Page 5

Advertising
background image

www.desatech.com

114370-01D

5

PRODUCT

IDENTIFICATION

WARNING: Failure to posi-

tion the parts in accordance

with these diagrams or failure

to use only parts specifically

approved with this appliance

may result in property damage

or personal injury.

Figure 1 - Product Identification (Ramp

Pan Burner)

Log Set
Assembly

Grate

Chassis

INSTALLATION

WARNING: Before installing

in a solid fuel burning fireplace,

the chimney flue and firebox

must be cleaned of soot, creo-

sote, ashes and loose paint by a

qualified chimney cleaner. Creo-

sote will ignite if highly heated. A

dirty chimney flue may create and

distribute soot within the house.

Inspect chimney flue for damage.

If damaged, repair flue damper

before operating appliance.

NOTICE: Installation, service and

repair of this appliance must be

performed by a qualified installer,

service agency, company or

gas supplier experienced with

this type of gas appliance. Only

factory authorized components

listed in these instructions may

be used in accordance with the

manufacturer's instructions and

all codes and requirements of

the authority having jurisdiction.

Any modifications to or use of

unauthorized components or

accessory items will void the

manufacturer’s warranty and may

result in a hazardous condition.

CHECK GAS TYPE

Use only natural gas. If your gas supply is not

natural gas, DO NOT install this gas log set.

If the fireplace does not have a gas supply shutoff

valve, one must be installed.

WARNING: This appliance is

equipped for natural gas. Field

conversion is not permitted.

FLUE OPENING SPECIFICATIONS

Note:

This vented appliance must be installed

only in a solid-fuel burning fireplace constructed

of noncombustible material.

The charts in Figure 2, page 6 indicate technical

information regarding the installation of your gas

log set. Please make sure that all of the specifica-

tions shown are applicable before installation is

attempted.

The fireplace must include a flue and venting

system with the minimum openings shown in

Figure 2, page 6.

Ceramic
Burner

Advertising
This manual is related to the following products: