Visara CNA-8000 Planning Guide User Manual
Page 33
Advertising
CNA-8000 Migration and Planning Guide
707156-002
3-7
Configuration Aids for Downstream Cisco Routers
Cisco Router physically connected by SDLC cable to downstream controller:
Configure the CNA-8000’s IP address:
dlsw remote-peer 0 199.62.189.15
If controller is configured with XID (PUID) parameters then the router should be
configured for:
sdlc prim-xid-poll
If controller is not configured with XID (PUID) parameters then the router should be
configured for:
sdlc primary
Sdlc
xid
aa
xxxyyyyy
Where aa= the poll address, xxx= the IDBLK option in the VTAM PU gen and yyyyy=
the IDNUM option in the VTAM PU gen.
Advertising