Visara CNA-8000 Planning Guide - Manual (Page 44)

Chapter 5. Migrating from 1174 or 3174
5-6 707156-002
New VTAM Switched PU Definitions
PU definitions used by the 1174 need to be converted from being Local Channel PU
definitions to Switched PU definitions belonging to one or more Switched Major nodes.
Below is a representation of the previous PU/LU definitions converted to Switched
definitions. Note that the same VTAM names are used for clarity.
SWVGROUP VBUILD TYPE=SWNET
VIS25LPU PU PUTYPE=2, PU2 CONTROLLER
MODETAB=SYSTSTMT,
MAXOUT=7,
DLOGMOD=D4A32782
V25LU02 LU LOCADDR=2
V25LU03 LU LOCADDR=3,
DLOGMOD=SCS
V25LU04 LU
LOCADDR=4,
DLOGMOD=SCS
.
.
.
AS400PU PU
CPNAME=CX9JUS, AS400
XID=YES,
PUTYPE=2,
CONNTYPE=APPN,
MODETAB=SYSTSTMT,
CPCP=YES,
MAXDATA=4105,
MAXPATH=1,
PACING=0
CX9JUS0 LU
LOCADDR=0
.
.
.
VSPU212 PU
CUADDR=702, TN3270 HOST
MODETAB=SYSTSTMT,
MAXOUT=7,
DLOGMOD=D4A32782
V212L02 LU
LOCADDR=2
V212L03 LU LOCADDR=3
V212L04 LU LOCADDR=4
.
.
.
VSPU213 PU
CUADDR=703, TN3270 HOST
MODETAB=SYSTSTMT,
MAXOUT=7,
DLOGMOD=D4A32782
V213L02 LU
LOCADDR=2
V214L03 LU LOCADDR=3
.
.
.
Note that for the most part the new PU definitions are very similar to the old definitions,
and the LU definitions are typically unchanged.