Visara CNA-8000 Planning Guide - Manual (Page 46)

Chapter 5. Migrating from 1174 or 3174
5-8 707156-002
Detailed Conversion from 1174 Configuration to CNA-8000 Configuration
For additional information concerning configuration options allowed by the CNA-8000
or even the 1174, please check to their respective manuals.
1174 ESCON Interface:
Line Options/ESC1 LINCS C8.2 Central Control
CU Index: 0
Protocol: SNA with Channel Path Filter
Device Low (Lowest IODEVICE UNITADD): 00
Device High (Highest IODEVICE UNITADD): 0D
CHANNEL PATH FILTER
LPAR Number (Partition Number): 1
Source Link Address: FF
CU Number (CUADD): 0
Attention Delay: 10
PF: 1-Menu 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
CNA-8000 ESCON or FICON Interface: