Using the kickstand – HP Spectre x2 User Manual
Page 19
Advertising
Using the kickstand
To change the angle for the display, follow these steps:
1.
Hold the tablet with top edge up (the power button is on top).
2.
Slide the kickstand release button (1) down to release the kickstand from the tablet.
3.
Position the kickstand (2) at the desired angle.
NOTE:
The kickstand angle can be set from about 30 degrees to 150 degrees.
To close the kickstand, push the kickstand against the bottom until it is flush with the bottom.
Bottom
11
Advertising