HP Spectre x2 - Manual (Page 21)

3. Insert a small straightened paper clip (1) into the card tray access hole.
4. Press in gently only until the card tray is ejected.
5. Remove the tray (2) from the computer, and then remove the card (3).
6. Replace the tray (4).
7. Press in gently on the tray until it is firmly seated.
Installing a micro SIM card (select products only)
CAUTION: To prevent damage to a SIM card or a computer, do not change the size of a SIM card by cutting or
sanding the card.
1. Insert a small straightened paper clip (1) into the card tray access hole.
2. Press in gently only until the card tray is ejected.
3. Remove the tray (2) from the computer, and then insert the card (3).
4. Replace the tray (4).
Installing a micro SIM card (select products only) 13