Watson-Marlow DF32 - Manual (Page 8)

Operator’s manual
DF32
Rev.: 1.03 Date: 2007-03-12 Page 8 of 32
File:
DF32 OM 1.03 EN
4.5 Fitting of filling stand
Fig. 4.2
The filling stand can be fitted to both ends of DF32.
First remove the screws (1)
Now you are able to fit the filling stand (4) by using the supplied distance tubes (2) and the screws (3).
The bottle guide (5) can be turned upside / down for adjusting to low or high bottles or containers.
DF32 is now ready to be switched on and to be programmed.