3 adjustment of the filling stand, 2 adjusting the capping sensor, Adjustment of the filling stand – Watson-Marlow FF30 V2 User Manual
Page 15: Adjusting the capping sensor, Instruction handbook
Advertising
INSTRUCTION HANDBOOK
FF30 V2
FF30 IH EN 74-216-201 v1.20.doc
Page 15 of 26
4.1.3 Adjustment of the filling stand
Loosen the finger screw at the bottom of the filling stand.
Adjust the filling stand and the filling nozzle over the centre of the bottle – over the second bottle in the
star wheel.
The nozzle tip should only be a few millimetres away from the bottle top to avoid squirt of product.
4.2 Adjusting the capping sensor
Place a bottle with a cap in front of the sensor.
The cap must be placed detachable on the top of the bottle – not screwed.
Loosen the finger screw of the sensor and adjust until the light is just below the top of the cap.
Advertising