Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 28)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
26
3.2 SIP Config
This WEB page will help user to configure the information about the dial mode,
SIP information and the ports for the communication. Please get more info
about this configuration from the below detail descriptions. (see figure 3.2)
Figure 3.2: SIP Configuration
u Mode – Pick up the calling mode for this gateway.
n Peer-2-Peer : It only supports the peer-to-peer mode and users have
to define the phone book for this mode.
n Proxy : Users have to register on the Proxy if users picked up this
option.
u Proxy IP Address – Enter the proxy ip if users pick up the proxy mode.
u Outbound Proxy – This version could support the outbound proxy, users
could define the ip address or domain name in this table.
u Proxy port – Users could change the destination port of the proxy. Before
this port changed, please make sure about that the Proxy port could be
changed in your proxy. The default value is 5060.
u Prefix String – Users could define this if the registration name was a
phonetic alphabet not the numbers.
u Line 1 Number – The phone number of the Tel 1.
u Line 2 Number – The phone number of the Line 1.