Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 9)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
7
1.4 Appearance
Front panel: The LED lights provide related system messages of the gateway.
SIPFXSO 1S1O
SIPFXSO 2S2O
Power: Light on means Gateway is power on, and vice versa.
TEL: Light on means the li ne is in use (off-hook), and vice versa.
LINE: Light on means the line is in use (off-hook), and vice versa.
Status:
1. LED light on means Gateway has successfully registered to Proxy when it
is in the Proxy Mode.
2. LED flash means Gateway is not registered to the Proxy when it is in the
Proxy Mode.
3. Or when Gateway is in downloading mode, LED should be flash as well.
4. LED light off means Gateway is in Peer-to-Peer Mode.
Ready:
1. Light on and slow flash means Gateway is in normal mode.
2. Light on and fast flash means Gateway is in downloading mode.
WAN: Connected to Public Ethernet
1. Line- LED light on means Gateway is physically connected to the Ethernet
correctly.
2. ACT- LED light on and flash when Ethernet data is being transmitted /
received.
LAN: Switch to another device, such as PC
1. Line- LED light on means Gateway is physically connected to the Ethernet
correctly.
2. ACT- LED light on and flash when Ethernet data is being transmitted
received.
Back panel: