Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 60)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
58
4. Command List
4.1 Hyper Terminal Setting
A terminal emulator is needed when using RS-232 port to configure Gateway.
There are kinds of terminal emulator software. Here, we use Microsoft
HyperTerminal to depict how to set up terminal emulator:
1. Execute the Hyper Terminal program, and then the following windows will
pop-up on the screen. (START – Program files – Accessories –
Communication – Hyper Terminal)
Figure 4.1: Hyper Terminal
2. Define a name such as ‘wg37’ for this new connection.